Insulation Multimeter Fluke 1587

Two powerful tools in one

The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switch gear, the Fluke 1587 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

    Error: Contact form not found.

    Compare
    • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
    • Insulation test: 0.01 MΩ to 2.0 GΩ
    • Auto discharge of capacitive voltage
    • Insulation test smoothing reading
    • Frequency
    • Capacitance
    • Diode test
    • Temperature
    • Min/Max
    • Low pass filter (for work on VSD’s)
    • AC/DC Voltage
    • DC millivolts
    • AC/DC milliamps
    • Resistance (0.1 Ω to 50 MΩ)
    • Continuity
    • Three-year warranty
    • Remote probe, test leads, alligator clips
    • K-type thermocouple
    • Rugged, utility hard case
    • Auto power off to save battery power
    • True RMS
    • Large display with backlight
    • Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
    • CAT III 1000V, CAT IV 600V measurement category
    • Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work
    Specifications
    Voltage DC Maximum voltage 1000 V
    Accuracy ±(0.09% + 2)
    Maximum resolution 0.001 V
    Voltage AC Maximum voltage 1000 V
    Accuracy ±(2% + 3)
    AC bandwidth 5 kHz1
    1. with low pass filter; 3 db @ 800 Hz
    Maximum resolution 0.1 mV
    Current DC Maximum amps 400 mA
    Amps accuracy ±(0.2% + 2)
    Maximum resolution 0.01 mA
    Current AC Maximum amps 400 mA
    Amps accuracy ±(1.5% + 2)2
    2. 1 kHz bandwidth
    Maximum resolution 0.01 mA
    Resistance Maximum resistance 50 MΩ
    Accuracy ±(0.9% + 2)
    Maximum resolution 0.1 Ω
    Capacitance Maximum capacitance 9,999 µF
    Accuracy ±(1.2% + 2)
    Maximum resolution 1 nF
    Frequency Maximum frequency 100 kHz
    Accuracy ±(0.1% + 1)
    Maximum resolution 0.01 Hz
    Temperature Measurement -40.0°C to 537°C
    -40.0°F to 998°F excluding probe
    Diode test Range/Resolution 6 V / 1 mV
    Accuracy ±(2% + 1)
    Insulation Test
    Minimum test current @ 1kΩ/V 1 mA
    Test Voltages 50, 100, 250, 500, 1000 V
    Maximum resistance per test voltage 50 V
    100 V
    250 V
    500 V
    1000 V 2 GΩ
    Maximum resolution per test voltage 50 V 0.01 MΩ
    100 V 0.01 MΩ
    250 V 0.1 MΩ
    500 V 0.1 MΩ
    1000 V 0.1 MΩ
    Accuracy per test voltage 50 V ±(3% + 5)
    100 V ±(3% + 5)
    250 V ±(1.5% + 5)
    500 V ±(1.5% + 5)
    1000 V ±(1.5% + 5) to 600 MΩ, ±(10% + 3) above 600 MΩ
    Environmental Specifications
    Operating temperature –20°C to +55°C
    Storage temperature -40°C to +60°C
    Humidity (without condensation) 0% – 95% (10°C – 30°C)
    0% – 75% (30°C – 40°C)
    0% – 40% (40°C – 55°C)
    Operating altitude 2000 m
    Safety Specifications
    Overvoltage category Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
    Agency approvals 2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V
    Mechanical and General Specifications
    Size 203 x 100 x 50 mm (with holster)
    Weight 624 g
    Warranty 3 years
    Battery life alkaline Meter use 1000 hours
    Insulation test u6se Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
    IP rating IP40

    Download Data Sheet

    Reviews

    There are no reviews yet.

    Be the first to review “Insulation Multimeter Fluke 1587”