Clamp Meter Fluke 376

You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes.
The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.

    Error: Contact form not found.

    Compare
    Categories: , Tags: ,
    • iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
    • CAT IV 600 V, CAT III 1000 V
    • True RMS AC voltage and current for accurate measurements on non-linear signals
    • Min, max, average and Inrush recording to capture variations automatically
    • Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
    • Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
    • Ergonomic design fits in your hand and can be used while wearing protective equipment
    • Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
    • Three-year warranty
    • Soft Carrying Case
    Electrical Specifications
    AC Current via Jaw
    Range 374 and 375
    376
    600.0 A
    999.9 A
    Resolution 0.1 A
    Accuracy 2% ± 5 digits (10-100 Hz)
    2.5% ± 5 digits (100-500 Hz)
    Crest Factor (50/60 Hz) 3 @ 500 A (375 and 376 only)
    2.5 @ 600 A
    1.42 @1000 A (376 only)
    Add 2% for C.F. > 2
    AC Current via Flexible Current Probe
    Range 2500 A
    Resolution 374 and 375 0.1 A (≤ 600 A)
    1 A (≤ 2500 A)
    376 0.1 A (≤ 999.9 A)
    1 A (≤ 2500 A)
    Accuracy 3% ±5 digits (5 – 500 Hz)
    Crest Factor (50/60Hz) 3.0 at 1100 A (375 and 376 only)
    2.5 at 1400 A
    1.42 at 2500 A
    Add 2% for C.F. > 2
    Distance from Optimum i2500-10 Flex i2500-18 Flex Error
    Flexible current probe A 0.5 in (12.7 mm) 1.4 in (35.6 mm) ± 0.5%
    B 0.8 in (20.3 mm) 2.0 in (50.8 mm) ± 1.0%
    C 1.4 in (35.6 mm) 2.5 in (63.5 mm) ± 2.0%
    Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range.
    DC Current
    Range 374 and 375
    376
    600.0 A
    999.9 A
    Resolution 0.1 A
    Accuracy 2% ± 5 digits
    AC Voltage
    Range 374 and 375
    376
    600.0 V
    1000 V
    Resolution 374 and 375
    376
    0.1 V
    0.1 V (≤ 600.0 V)
    1 V (≤ 1000 V)
    Accuracy 1.5% ± 5 digits (20 – 500 Hz)
    DC Voltage
    Range 374 and 375
    376
    600.0 V
    1000 V
    Resolution 374 and 375
    376
    0.1 V
    0.1 V (≤ 600.0 V)
    1 V (≤ 1000 V)
    Accuracy 1% ± 5 digits
    mV dc
    Range 375 and 376 500.0 mV
    Resolution 0.1 mV
    Accuracy 1% ± 5 digits
    Frequency via Jaw
    Range 375 and 376 5.0 – 500.0 Hz
    Resolution 0.1 Hz
    Accuracy 0.5% ± 5 digits
    Trigger Level 5 – 10 Hz, ≥10 A
    10 – 100 Hz, ≥5 A
    100 – 500 Hz, ≥10 A
    Frequency via Flexible Current Probe
    Range 375 and 376 5.0 – 500.0 Hz
    Resolution 0.1 Hz
    Accuracy 0.5% ± 5 digits
    Trigger Level 5 – 20 Hz, ≥ 25 A
    20 – 100 Hz, ≥ 20 A
    100 – 500 Hz, ≥ 25 A
    Resistance
    Range 374
    375 and 376
    6000 Ω
    60 kΩ
    Resolution 374 0.1 Ω (≤ 600 Ω)
    1 Ω (≤ 6000 Ω)
    375 and 376 0.1 Ω (≤ 600 Ω)
    1 Ω (≤ 6000 Ω)
    10 Ω (≤ 60 kΩ)
    Accuracy 1% ± 5 digits
    Capacitance
    Range 1000 μF
    Resolution 0.1 μF (≤ 100 μF)
    1 μ F (≤ 1000 μF)
    Accuracy 1% ± 4 digits
    Mechanical Specifications
    Size (L x W x H) 246 mm x 83 m x 43 mm
    Weight 388 g
    Jaw Opening 34 mm
    Flexible Current Probe Diameter 7.5 mm
    Flexible Current Probe Cable Length
    (head to electronics connector)
    1.8 m
    Environmental Specifications
    Operating Temperature 10°C – +50°C
    Storage Temp -40°C – +60°C
    Operating Humidity Non condensing (< 10 –°C)
    ≤ 90% RH (at 10°C – 30°C)
    ≤ 75% RH (at 30°C – 40°C)
    ≤ 45% RH (at 40°C – 50°C)
    Operating Altitude 3000 meters
    Storage Altitude 12,000 meters
    EMC EN 61326-1:2006
    Temperature Coefficients Add 0.1 x specified accuracy for each
    degree C above 28°C or below 18°C
    Safety Specifications
    Safety Compliance CAN/CSA-C22.2 No. 61010-1-04
    ANSI/UL 61010-1:2004
    ANSI/ISA-61010-1 (82.02.01):2004
    EN/IEC 61010-1:2001 to
    1000V Measurement Category (CAT) III
    600V Measurement Category (CAT) IV
    Pollution Degree 2
    EN/IEC 61010-2-032:2002
    EN/IEC 61010-031:2002+A1:2008
    Agency Approvals
    Batteries 2 AA, NEDA 15A, IEC LR6

    Download Data Sheet

    Reviews

    There are no reviews yet.

    Be the first to review “Clamp Meter Fluke 376”